OHM CT-12

The OHM CT-12 is the 12″ version loudspeaker of the four arrayable full range cabinets in the Total Clarity series. This passive two way loudspeaker is designed for both install and mobile use offering great flexibility to suit even the most difficult applications. To maximise the transient response and minimise the heat build up inside the cabinet the crossover has been simplified to adjust only the impedance and the crossover point. The use of external EQ makes it easy to tailor the tonal balance to each individual requirement without compromising the sound quality.

When space is an issue this compact cabinet achieves good bass response without the need for subwoofers. If more bass is required CT-12 is compatible with the larger CS subwoofers making it easy to adjust the total system performance for all situations.

The speaker comes standard in black and is available in various colours on request.

Features of OHM CT-12

• True full range performance
• Rotatable 60° x 40° horn for enhanced flexibility
• Full range down to 55 Hz for standalone use where space is constricted

CT-12 uses a single OHM 12″ with 3″ voice coil driver unit with 1.5″ compression driver mounted on a custom design rotable 60(h) x 40(v) degree horn. The horn is mounted in the 60(h) x 40(v) degree position as standard. When rotated into 40(h) x 60(v) degree together with 20 degree side wall angle true seamless point source arrays can be created.

Phase and impedance corrected crossover networks are designed for high power applications and the use of external EQ provides unrivalled tonal balance and transient response. Used with the CS subwoofers these systems will provide a very high SPL with total clarity.

There are 12 off mounting points for flexible array and flying options 6 for Brownline compatible flying points 2 x top, 2 x bottom and 2 x on the bottom pf the rear of the cabinet. The other 6 take M10 flying eyelets 2 x on each side 1 x on the top and 1 x on the bottom. The bottom of the cabinet has the omni point where the top hat is fitted as standard to allow stand mounting. The top hat can be replaced with the the tilt and turn adaptor for wall, stand and truss mounting.