OHM BRT-12A
Single 12” + 1.5” active full range cabinet
The OHM BRT-12A is a high performance 1 KW self-powered loudspeaker which is ideally suited to both portable use and fixed installation.
Using two high-power 500 w Class D amplifiers with integrated DSP, these self-powered cabinets have dedicated amplification for each component, removing crossover distortion and increasing audio quality. Full FIR filtering achieves further detail and definition with a factory calibrated, pre-set coupled with RMS and Peak limiters ensure the drivers stay within safe parameters.
Designed with an OHM 12” proprietary woofer and 1.5” compression driver, the internal DSP ensures a linear, usable frequency response of 63 Hz to 20.2 kHz across 60°x 40° dispersion with rotatable horn with a maximum SPL of 134 dB.
The discreet design with reticulated foam front and acrylic textured paint finish and multiple integrated fixing points achieves a high class look suitable for any application. Sharing voicing characteristics with the rest of the BR series allowing them to be used simultaneously, keeping a consistent tone.
Mounting options include integrated aluminium top-hat and horizontal cradle fixing points for use with the BRC-12H Horizontal, BRC-12V Vertical Yoke and rear mounted pan and tilt bracket PTL. Other fixings can be used with this cabinet such as the fixed large wall bracket (LWB) and pan and tilt wall bracket (LWB-PT). This product is also Powerdrive compatible with the type 100 plate products.
The rear connection plate has two input and two link XLR connectors and a powerCON® TRUE1 input and link fitted as standard.
Please call us at Old Barn Audio on 01892 752246 if you have any questions or would like to buy or have installed OHM BRT-12A speakers or indeed any other product from the OHM Range.
Features of OHM BRT-12A Speakers
- World-wide voltage compatibility
- Full input and output protection modes
- Module power efficiency of 89%
- 32 bit floating-point signal processing
- Analog Devices Sharc processor
- Linear phase FIR filters for predictable system response
- Dual band Look-Ahead Peak Limiter
- Dual band RMS Limiter
- Wide dynamic range 128dB(A) input converter
- Genuine Neutrik® Signal and Power connectors